Acrylic PVC Bender Machine 110V Sheet Bender Manual Strips Heater for Plastic Bending Tool 1mm-6mm Thickness, Sign Making (49.25")

Specifications:Input Voltage: Ac 110VHeating Peak: Zw-300 420 ℃, The Other 250 ℃Heating Bending Thickness: 1-6mmHeating Port Width: 8mmEffective Heating Length: 1220 MmPower: 1500WProduct Size：Approx.135*4*4cm/53.1*1.6*1.6inNet Weight:4kgGross Weight: 4.5kgPackage Dimensions (L x W x H): 147*20*12cm Instructions:Keep a Cooling Tank (Barrel) Of More Than 30 Liters. First, Connect The Heater Body And The Submersible Pump With a Silicone Hose. Place The Submersible Pump In The Cooling Bucket, Connect The Power Supply Of The Pump, And Wait For The Water To Circulate Out. (Note: The Water Temperature Of The Machine Will Keep Rising For a Long Time. Please Replace The Cold Water Clearly. The Temperature Of The Circulating Water Should Not Drop Abruptly. When The Water Temperature Exceeds 50 Degrees, The Power Supply Of The Heater Should Be Cut Off In Time, And The Circulating Water Should Be Replaced Later).Connect The Thermostat With The Hot Bender And Connect It To 220V Power Supply. Adjust The Knob Of The Thermostat Controller. The Clockwise Direction Is To Raise The Temperature, And Vice Versa. When Adjusting, It Is Not Appropriate To Rotate Too Fast In Order To Avoid Damaging The Thermostat. (Note: It Is Advisable To Slowly Adjust The Thermostat To a Reddish Heat Pipe. Excessive Temperature Will Cause Damage To The Hot Bending Material And Affect The Service Life Of The Hot Bender).When The Heating Pipe Reaches The Required Temperature, It Can Place The Plastic Sheet Which Needs To Be Hot-Bended On The Heating Trough. When The Sheet Is Soft Enough To Be Folded Manually, It Can Bend At Various Angles. According To The Different Materials, The Setting Time Is Different. Please Determine The Setting Time According To The Actual Situation. Packing List:1 X Acrylic Pvc Bending Machine Heater1 X Water Pump

• Safety Water Circulation Cooling: There is water circulation cooling on both sides of the plastic sheet bender heating tube to ensure that there will be no thermal deformation except where heating is needed
• Plastic Bender Applicable Materials: Acrylic, organic board, PVC and various thermoplastic materials
• Work In Pair: If the thickness of acrylic material is beyond 0.24" (6 mm), you can choose to apply two plastic bending strip heater to heat both top and bottom of the material at the same time
• Acrylic Bending Machine Application: Widely used in decoration engineering, sign making, display cabinets, aquarium wrapping, lighting LED channel letters, supermarket shelves, curtain walls, large light boxes, etc
• Service: Your satisfaction is our top priority. If you have a problem with a transaction, Just let us know and MONIPA will work with you to resolve the issue